MBE-H12 Fitting: Reservoir to Chip
THIS IS A FITTING AS INLET RESERVOIR TO BE USED WITH LIMITED VOLUME SAMPLES. EASILY CONNECTED. IT CAN BE USED AT INLET OR OUTLET ACCORDING TO APPLICATION.
ALL PRICES ARE WITHOUT VAT AND THE SHIPPING COSTS CAN BE SEEN AT THE SHOPPING CART AFTER PROVIDING SHIPPING ADDRESS.
Have the chips, OK. How it is possible to send liquid samples inside the microchannels needs additional solution such as direct pipetting, pumping, capillary forces or centrifuging.
If the selection is syring pumping than, a syringe, tubing and fittings are needed. Syringes and tubing have unused sample initial sample volume, so when the sample volume is critically low, additional reservoir is needed to be applied.
Top side is connected to tubing and bottom side is connected to chip inlet or outlet.
We print all kinds of fittings, connectors and holders by DLP/SLA 3D printer. Here you can find ready to use designs and it is also possible to provide custom solutions for your project needs.
Specification | Info |
Type of fitting | Reservoir for low volume sample |
Material | BV007, 3D printer resin, cured by 385nm UV. |
Total XYZ size | 4.5 mm x 5.25 mm x 12.5 mm |
Liquid passing inner diameter ID | Side openings ID=1.0mm, Inner Volume ID= 5.2mm |
Chip connection OD | 2 mm |
Weight, grams | 0,2 -/+ 0.02 |
Additional Requirements | Suggestions |
Actuation | After loading the critical volume sample inside, the actuation can be done bu a syringe pump. |
Tubing | Not applicable |
Chemicals | This information is available upon request |
Visualisation | This fitting is semi-transparent and available to be used under light-microscopy. Auto-Fluorescence information is not available but we can study upon request. |
These are some highly sited articles from literature. The chip designs are not identical but working is same in principle.
... |
... |
... |
Kullanım Kılavuzu | Yakında eklenecektir. |
Örnek nasıl yüklenir? |
|
Nasıl Kullanılır? - Multimedya | Yakında eklenecektir? |