
MBE-H32 Fitting: Open Reservoir to HÜCREK Holder
THIS IS A FITTING AS INLET TOP-OPEN RESERVOIR TO BE USED WITH HÜCREK HOLDER CONNECTED CHIPS SUCH AS ORGAN-ON-A-CHIPS FOR PASSIVE FLOW. IT CAN BE USED AT INLET OR OUTLET REGARDING APPLICATION.
ALL PRICES ARE WITHOUT VAT AND THE SHIPPING COSTS CAN BE SEEN AT THE SHOPPING CART AFTER PROVIDING SHIPPING ADDRESS.
Have the chips, OK. How it is possible to send liquid samples inside the microchannels needs additional solutions such as direct pipetting, pumping, capillary forces or centrifuging.
If the selection is syringe pumping; a syringe, tubing, and fittings are needed. Syringes and tubing have an unused sample initial sample volume, so when the sample volume is critically low, an additional reservoir is needed to be applied.
Load the growth medium or cell suspension inside the reservoir, the liquid will go inside microchannels at a relatively slow flow rate by gravity. The flow rate decreases as time pass and liquid height become smaller.
We print all kinds of fittings, connectors, and holders by DLP/SLA 3D printer. Here you can find ready to use designs and it is also possible to provide custom solutions for your project needs.
Specification | Info |
Type of fitting | Top-Open Reservoir for the passive flow of growth media |
Material | BV007, 3D printer resin, cured by 385nm UV. |
Total XYZ size | 10.2 mm x 15.0 mm x 20.2 mm |
Liquid passing inner diameter ID |
Chip port opening ID=1.0mm, Top Opening ID= 7.0 - 12.0 mm |
Chip connection OD | 2 mm |
Inner Reservoir Volume | 700 uL |
Weight, grams | 0,95 -/+ 0.005 |
Additional Requirements | Suggestions |
Actuation | After loading the critical volume sample inside, the actuation can be done bu a syringe pump. |
Tubing | Not applicable |
Chemicals | This information is available upon request |
Visualization | This fitting is semi-transparent and available to be used under light-microscopy. Auto-Fluorescence information is not available but we can study upon request. |
These are some highly sited articles from literature. The chip designs are not identical but working is same in principle.
... |
... |
... |
Kullanım Kılavuzu | Yakında eklenecektir |
Örnek Nasıl Yüklenir - Multimedya | Yakında eklenecektir |
Uygulama Örneği - Multimedya | Yakında eklenecektir |