BC2-Z300 Basic Parallel micro Channel
THIS IS A SINGLE LINE CHANNEL FOR BASIC APPLICATIONS REQUIRING SMALL VOLUME SAMPLE ANALYSIS. COMPATIBLE WITH MULTI-CHANNEL PIPETTES. 6 PARALLEL CHANNELS, NUMBERED. CHANNEL LENGTH (Y) IS FIXED BUT CHANNEL WIDTH (X) IS VARIABLE. FOR OTHER MICROCHANNEL SIZES, PLEASE ASK FOR CUSTOM FABRICATION.
ALL PRICES ARE WITHOUT VAT AND THE SHIPPING COSTS CAN BE SEEN AT THE SHOPPING CART AFTER PROVIDING SHIPPING ADDRESS.
Microfluidics is beneficial for saving reagent consumption. Single-channel devices are suitable for the applications below;
--- Life Sciences: Immunofluorescence assays, Cell-based short time assays
--- Pharmaceutical Sciences: Parallel screening of antibodies or pharmaceuticals,
--- Biotechnology: Live-cell imaging, cell culture under flow,
--- Diagnostic tech: Diagnostic devices for personalized medicine, novel biosensor research
--- Others: Chemical synthesis and screening, cosmetics, food industry, aerospace and more...
|Number of devices per chip||6 devices|
|Material||PDMS bonded on microscopy glass. Please also check the "Our Trip to PDMS Chips" blog post.|
|Bonding technique||Oxygen plasma treatment|
|XY Size of total chip||25x73 mm2 of a chip on 26x76 mm2 of std microscopy glass|
|Z Height of PDMS chip||3.0 - 4.0 mm|
|Y Length of microchannels||Y length is 61.8 mm.|
|X Width of microchannels||X width is optional and can be 0.5, 0.25, 0.10, 0.05, 0.02, 0.01 mm|
|Z Height of microchannels||300 micrometer|
|Microchannel surface area||18,54 mm2 per channel excluding ports for 0.3x61.8 mm2 (XY)|
|Microchannel volume||5,562 uL per channel excluding ports for 0.3x61.8x0.3 mm3 (XYZ)|
|Ports on top/edge||on Top|
|Number of ports||2 ports per device|
|Pitch btw ports and edge-to-port||3 mm and 3.5 mm|
|Size / Shape of ports||2 mm / Circle|
|Suitable connector outer diameter||2.0 - 2.5 mm|
|The layout of active ports|
|Pumping/Actuation||Flow and mixing of the liquids inside microchannels require low-pulsation flow.
Some high-quality syringe pumps and pressure pumps work well.
Peristaltic and piezo electronic pumps may also be suitable but mind the possible relatively high pulsation.
|Fittings||All fittings in ufluidic.com are suitable for this chip. Any other connectors compatible with pitch and port size are also applicable. The reactive compatibility of the fittings is also important to be considered.|
|Chemicals||Depends on the application of the researcher.|
|Visualization||Epi-Fluorescent Microscopy is widely used together with microfluidic chips.
Other analysis techniques should be determined by user researchers for the experiments where optical changes inside chips do not occur.
These are some highly sited articles from literature. The chip designs are not identical but working is same in principle.
|Kondrashina et.al. 2013|
|Measurement of cell respiration and oxygenation in standard multichannel biochips using phosphorescent O2-sensitive probes|
|Ganguly et.al. 2012|
|Isolation of Human Umbilical Vein Endothelial Cells and Their Use in the Study of Neutrophil Transmigration Under Flow Conditions|
|Kullanım Kılavuzu||Yakında eklenecektir|
|Nasıl kullanılır - Multimedya||Yakında eklenecektir|
|Akış Testi - Multimedya||