MBE-EH1-1 Fitting: Absorbing Reservoir to Chip
THIS IS A FITTING AS RESERVOIR TO BE USED DIRECTLY ON OUTLET PORT OF MICROCHANNELS.
PUMP FREE, ELECTRIC FREE, PULSATION FREE
ALL PRICES ARE WITHOUT VAT AND THE SHIPPING COSTS CAN BE SEEN AT THE SHOPPING CART AFTER PROVIDING SHIPPING ADDRESS.
Have the chips, OK. How it is possible to send liquid samples inside the microchannels needs additional solutions such as direct pipetting, pumping, capillary forces or centrifuging.
If the selection is a point of need device, the user may need no pulsation slow flow.
Specification | Info |
Type of fitting | Top-Open Reservoir for the passive flow of growth media |
Material |
BV007, 3D printer resin, cured by 385nm UV. Sodium polyacrilate granules Filter paper |
Total XYZ size | ... mm x ... mm x ...2 mm |
Liquid passing inner diameter ID |
Chip port opening ID=1.0mm, |
Chip connection OD | 2 mm |
Inner Reservoir Volume | ... uL |
Weight, grams | 3,0 -/+ 0.01 |
Additional Requirements | Suggestions |
Actuation | After loading the critical volume sample inside, the actuation is passivly performed by fitting. |
Tubing | Not applicable |
Chemicals | This information is available upon request |
Visualization | This fitting is semi-transparent and available to be used under light-microscopy. Auto-Fluorescence information is not available but we can study upon request. |
These are some highly sited articles from literature. The chip designs are not identical but working is same in principle.
... |
... |
... |
Name | Media-Doc |
Akış Testi |
|
Nasıl Kullanılır? |
|