MBE122 Fitting: Tubing to Double Tubing

NBT Original

  • €1,69
    Unit price per 
Shipping calculated at checkout.


THIS IS A FITTING FOR SILICON TUBINGS. EASILY CONNECTED THREE TUBING PARTS. IT IS ALSO SUITABLE TO BE USED WITH ANY PDMS CHIP IF SPECS ARE SUITABLE.

ALL PRICES ARE WITHOUT VAT AND THE SHIPPING COSTS CAN BE SEEN AT THE SHOPPING CART AFTER PROVIDING SHIPPING ADDRESS.

 

 


Have the chips, OK. How it is possible to send liquid samples inside the microchannels needs additional solution such as direct pipetting, pumping, capillary forces or centrifuging.

If the selection is syring pumping than, a syringe, tubing and fittings are needed.

Single liquid source may be needed to be devided or two different solution may be needed to be combined before getting inside microfuidic chip.

We print all kinds of fittings, connectors and holders by DLP/SLA 3D printer. Here you can find ready to use designs and it is also possible to provide custom solutions for your project needs.

 


 DATASHEET
 
Specification Info
Type of fitting Tubing to Double Tubing
Material BV007, 3D printer resin, cured by 385nm UV.
Total XYZ size available soon
Liquid passing inner diameter ID 1 mm
Tubing connection outer diameter OD 2 mm
Chip connection ID and OD 1 mm and 2 mm
Weight, grams  ?

 


 REQUIREMENTS
>
Additional Requirements Suggestions
Actuation Need a suitable pumping system
Tubing Need a tubing (preferebly silicon) with ID of 1.5-2.00 mm and OD of 2.1-5.00 mm
Chemicals This information is available upon request
Visualisation This fitting is semi-transparent and available to be used under light-microscopy. Auto-Fluorescence information is not available but we can study upon request.

 


 LITERATURE

Application examples from literature

These are some highly sited articles from literature. The chip designs are not identical but working is same in principle.

...
...
...
 
 
 


We Also Recommend