MBE452 Fitting: Syringe to Tubing, fits Luer-Lock tip
THIS IS A FITTING FOR STANDARD LUER and LUER-LOCK PLASTIC SYRINGE AND SILICON TUBING. EASILY CONNECTED BOTH WITHOUT NEEDLE.
ALL PRICES ARE WITHOUT VAT AND THE SHIPPING COSTS CAN BE SEEN AT THE SHOPPING CART AFTER PROVIDING SHIPPING ADDRESS.
Have the chips, OK. How it is possible to send liquid samples inside the microchannels needs additional solution such as direct pipetting, pumping, capillary forces or centrifuging.
If the selection is syringe pumping than, a syringe, tubing, and fittings are needed.
We print all kinds of fittings, connectors, and holders by DLP/SLA 3D printer. Here you can find ready to use designs and it is also possible to provide custom solutions for your project needs.
|Type of fitting||Syringe to tubing|
|Material||BV007, 3D printer resin, cured by 385nm UV.|
|Total XYZ size||7.0 mm x 7.0 mm x 13.0 mm|
|Liquid passing inner diameter ID||1 mm|
|Tubing connection outer diameter OD||2 mm|
|Syringe tip connector inner diameter ID||< 5 mm|
|Weight, grams||0,29 -/+ 0.02|
|Syringe||Need a suitable Luer or Luer-Lock syringe to be used with|
|Tubing||Need a tubing (preferably silicon) with ID of 1.5-2.00 mm and OD of 2.1-5.00 mm|
|Chemicals||This information is available upon request|
|Visualization||This fitting is semi-transparent and available to be used under light-microscopy. Auto-Fluorescence information is not available but we can study upon request.|
These are some highly sited articles from literature. The chip designs are not identical but working is the same in principle.
|Kullanım Kılavuzu||Yakında eklenecektir|
|Nasıl kullanılır - Multimedya||Yakında eklenecektir|
|Akış Testi - Multimedya||Yakında eklenecektir|