MBE512 Fitting: MicroPipette Tip to Chip
THIS IS A FITTING FOR DIRECT LIQUID TRANSFER FROM MICROPIPETTE TO UFLUIDIC.COM CHIPS. EASILY CONNECTED BOTH WITHOUT NEEDLE. IT IS ALSO SUITABLE TO BE USED ANY PDMS CHIP IF SPECS ARE COMPATIBLE.
ALL PRICES ARE WITHOUT VAT AND THE SHIPPING COSTS CAN BE SEEN AT THE SHOPPING CART AFTER PROVIDING SHIPPING ADDRESS.
Have the chips, OK. How it is possible to send liquid samples inside the microchannels needs additional solution such as direct pipetting, pumping, capillary forces or centrifuging.
If the selection is syring pumping than, a syringe, tubing and fittings are needed.
We print all kinds of fittings, connectors and holders by DLP/SLA 3D printer. Here you can find ready to use designs and it is also possible to provide custom solutions for your project needs.
|Type of fitting||Pipette Tip to Chip|
|Material||BV007, 3D printer resin, cured by 385nm UV.|
|Total XYZ size||4.0 mm x 4.0 mm x 7.5 mm|
|Liquid passing inner diameter ID||1 mm|
|Tip connection inner diameter ID||< 2.2 mm|
|Chip connection ID and OD||1 mm and 2 mm|
|Weight, grams||0,065 -/+ 0.02|
|Actuation||Need a suitable micropipette tip. Mostly 100 uL pipette tips are suitable.|
|Tubing||Need a tubing (preferebly silicon) with ID of 1.5-2.00 mm and OD of 2.1-5.00 mm|
|Chemicals||This information is available upon request|
|Visualisation||This fitting is semi-transparent and available to be used under light-microscopy. Auto-Fluorescence information is not available but we can study upon request.|
These are some highly sited articles from literature. The chip designs are not identical but working is same in principle.
|Kullanım Kılavuzu||Yakında eklenecektir|
|Nasıl kullanılır - Multimedya||Yakında eklenecektir|