MBE612 Fitting: Stopper to Chip
THIS IS A FITTING FOR STOPPING LIQUID FLOW ON A SPECIFIC CHANNEL OR OUTLET OF UFLUIDIC.COM CHIPS. EASILY CONNECTED. IT IS ALSO SUITABLE TO BE USED ANY PDMS CHIP IF SPECS ARE COMPATIBLE.
ALL PRICES ARE WITHOUT VAT AND THE SHIPPING COSTS CAN BE SEEN AT THE SHOPPING CART AFTER PROVIDING SHIPPING ADDRESS.
Have the chips, OK. How it is possible to send liquid samples inside the microchannels needs additional solution such as direct pipetting, pumping, capillary forces or centrifuging.
If the selection is syring pumping than, a syringe, tubing and fittings are needed.
We print all kinds of fittings, connectors and holders by DLP/SLA 3D printer. Here you can find ready to use designs and it is also possible to provide custom solutions for your project needs.
Specification | Info |
Type of fitting | Stopper for specific channels or outlets |
Material | BV007, 3D printer resin, cured by 385nm UV. |
Total XYZ size | 4.0 mm x 4.0 mm x 7.5 mm |
Liquid passing inner diameter ID | no liquid or gas passing |
Chip connection OD | 2 mm |
Weight, grams | 0,067 -/+ 0.02 |
Additional Requirements | Suggestions |
Actuation | Stops actuation :) |
Tubing | Not applicable |
Chemicals | This information is available upon request |
Visualisation | This fitting is semi-transparent and available to be used under light-microscopy. Auto-Fluorescence information is not available but we can study upon request. |
These are some highly sited articles from literature. The chip designs are not identical but working is same in principle.
... |
... |
... |
Kullanım Kılavuzu | Yakında eklenecektir |
Nasıl kullanılır - Multimedya | Yakında eklenecektir |