Service of Custom MBE 3D Printed Microfluidic Acccessories

NBT Original

  • €9,00
    Unit price per 
Shipping calculated at checkout.


THIS IS A SERVICE OF CUSTOM SPECIALLY DESIGNED MICROFLUIDIC FITTING / CONNECTOR / HOLDER FABRICATION.

ALL PRICES ARE WITHOUT VAT AND THE SHIPPING COSTS CAN BE SEEN AT THE SHOPPING CART AFTER PROVIDING SHIPPING ADDRESS.

 

 


Have the chips, OK. How it is possible to send liquid samples inside the microchannels needs an additional solution such as direct pipetting, pumping, capillary forces or centrifuging.

If the selection is syringe pumping than, a syringe, tubing, and fittings are needed.

We print all kinds of fittings, connectors, and holders by DLP/SLA 3D printer. Here you can find ready to use designs and it is also possible to provide custom solutions for your project needs.

 



 DATASHEET
 
Specification Info
Type of fitting DEPENDS ON YOUR NEED
Material BV007, 3D printer resin, cured by 385nm UV.
Max XYZ size 25.0 mm x 25.0 mm x 25.0 mm

 


REQUIREMENT 

Additional Requirements Suggestions
Chip Need a suitable microfluidic chip to be used with
Tubing Need a tubing (preferably silicon) with ID of 1.5-2.00 mm and OD of 2.1-5.00 mm
Chemicals This information is available upon request
Visualization This fitting is semi-transparent and available to be used under light-microscopy. Auto-Fluorescence information is not available but we can study upon request.

 


LITERATURE 

Application examples from literature

These are some highly cited articles from literature. The chip designs are not identical but working is the same in principle.

...
...
...

 Kullanım Kılavuzu  Yakında eklenecektir 
 Nasıl kullanılır - Multimedya   Yakında eklenecektir 


We Also Recommend