Layout of Ports for PDMS microfluidic Devices

tarihinde Nazım Yılmaz tarafından gönderildi

 Standardization of microfluidic chips is accepted as important as the cost of chips and high-throughput analysis.

Layout of Ports for PDMS microfluidic Devices

 

 Microfluidics as a novel technology, today it is at initial steps and needs standardization. The chips and microchannels, all have a standard layout of ports which is both suitable for various top-side connectors and multi-pipettes.

Layout

Value

Glass base 

76000 x 26000 microns

PDMS chip 

58000 x 25000 microns

Ports inlet/outlets 

Circular with 0.5, 1.0, 1.5, 2.0, 3.0 and 1/16, 1/32 inch of diameter

The pitch between port centers 

3000 microns

Pitch between PDMS edge to port center 

3500 microns

Number of ports on the short side

5 ports

Number of ports on the long side

16 ports

...

...


Bu gönderiyi paylaşın



Daha Yeni Gönderi →


Yorum yapın

Yorumların yayınlanabilmesi için onaylanması gerektiğini lütfen unutmayın.